Your power tool uses a basic toggle switch that breaks the hot side of the circuit after thousands of cycles and years of use the switch will wear out testing for a bad switch can be easily done using a multimeter replacing the on/off switch is repair that you can do yourself and I’m going to show you how Do It.

Yourself returns like these are easier than you might think from on machines to cordless drills kitchen mixers outdoor grill our how-to videos walk you through each repair from start to finish so doing it yourself means never having to do I’ll begin by removing the motor cap from the motor I’ll also remove.

The wires from the switch with the cap removed now I can remove the switch now it can begin installing the new switch first I’ll transfer the plastic cover from the old switch to the new and now I can snap the switch back into the cover now reconnect the wires to.

The switch first the black wire and then the red and now I can reattach the cap and I’ll secure it with the screws and that’s how you can install a new on/off switch on your router be sure to check back often for new videos and.
Found this video helpful give us a thumbs up and leave a comment..

Dino Ciccarelli Authentic Jersey  Austin Czarnik Authentic Jersey